Rapid H20™ EP

Thick-Build, Fast-Cure, Water-Based Epoxy

Rapid H20™ EP is a unique "thick-build" water-based epoxy that is designed to cure fast. It may be applied up to 20-mils thick, providing an excellent base coat to receive chip or quartz aggregates. It has a long 45 minute working time and is dry to walk on within 3 hours. At around 45-minutes, the material immediately evacuates the water and snap-cures. This process tightens the film and helps to ensure a consistent and even broadcast. 

A 0-VOC material, Rapid H2O™ EP is available in both clear and pre-pigmented standard colors. There is virtually 0-odor and tools may be cleaned post application with water, making it a safe and easy to use alternative to traditional solvent based coatings. Rapid H2O EP may be used as a stand-alone finish or with any one of our Resinwerks top-coats.  

    1. Mix Ratio: 2 Parts A to 1 Part B, reduced with 1-gallon of water
    2. 3-gallon kit reduced with water to 4 gallons
    3. Clear or pre-pigmented
    1. Thick build application up to 20 mils
    2. 0-VOC and NO odor
    3. fast dry times
    4. Excellent base coat for chip or quartz
    1. Technical Data Sheet
    2. Color Card
Log in to purchase